欢迎来到信誉一分彩网投大平台官方网站!
全国咨询热线0531-84277123
您的位置: 首页>> 工程案例 >>常见问答

咨询热线

15628816012

电动升降平台溫相处高的造成原因

作者:天麒液压机械 浏览:86 时间:2019-10-25 www.tqsjj.com

信息摘要:

电动升降平台,液压货梯,滑轨式液压升降货梯在应用过段时间之后,因为维护保养不

电动升降平台溫相处高的造成原因

电动升降平台,液压货梯,滑轨式液压升降货梯在应用过段时间之后,因为维护保养不及时在所难免出現某些小的常见故障,在其中电动升降平台电路系统和液压传动系统溫度过高是最普遍的,这里液压货梯工程师为你分析温度过高形成的原因,希望对您有所帮助:

After the application of electric lifting platform, hydraulic goods elevator and slide rail type hydraulic lifting goods elevator for a period of time, due to the untimely maintenance, it is inevitable to have some small common faults, among which the electric lifting platform circuit system and hydraulic transmission system are the most common. Here, the hydraulic goods elevator Engineer will analyze the causes of the high temperature for you, hoping to help you:

1、电动升降平台持续过载应用。 2、电动升降平台在溫度过高的自然环境上班时间过长,会使溫度极速上升;3、电动升降平台输油管公称直径小或是因为外力作用的缘故造成输油管钣金折弯,导致燃油管公称直径缩小;给油口和吸输油管油水分离器网毁坏,导致液压油混入固体颗粒杂质阻塞油路,造成液压油量供给不足,极大地加大了系统压力从而使液压油温度升高。

1. Continuous overload application of electric lifting platform. 2. If the electric lifting platform works in the natural environment with too high temperature for too long, the temperature will rise rapidly; 3. If the nominal diameter of the oil pipe of the electric lifting platform is small or the sheet metal of the oil pipe is bent due to the external force, the nominal diameter of the fuel pipe will be reduced; the oil-water separator network of the oil inlet and the oil suction pipe will be damaged, resulting in the hydraulic oil mixed with solid particles and impurities blocking the oil path. The system pressure is greatly increased and the temperature of hydraulic oil is increased.

4、电动升降平台液压缸內部缘故,历经长期的应用,液压缸內部减振骨架密封损坏比较严重导致液压缸内泄量扩大而造成溫度上升。

4. Due to the internal reason of the hydraulic cylinder of the electric lifting platform, after long-term application, the sealing damage of the damping framework inside the hydraulic cylinder is relatively serious, which leads to the expansion of the internal leakage of the hydraulic cylinder and the rise of the temperature.

5、出示驱动力的电机维护保养不立即导致滚动轴承毁坏,电机电机转子扫膛,磨擦造成发热量。

5. If the maintenance of the motor with driving force is not carried out immediately, the rolling bearing will be damaged, the rotor of the motor will be swept, and the friction will cause heat generation

XML 地图 | Sitemap 地图