欢迎来到信誉一分彩网投大平台官方网站!
全国咨询热线0531-84277123
您的位置: 首页>> 工程案例 >>公司新闻

咨询热线

15628816012

剪叉式液压升降机特点/载重500公斤/现货包邮

作者:天麒液压机械 浏览:82 时间:2019-10-18 www.tqsjj.com

信息摘要:

液压升降机这是这种竖直移动升降机,是这种用以货运运输的专用型升降平台子,在室外常有普

剪叉式液压升降机特点/载重500公斤/现货包邮

剪叉式液压升降机这是这种竖直移动升降机,是这种用以货运运输的专用型升降平台子,在室外常有普遍的运用,剪叉式液压升降平台是因为剪叉式升降机构造的应用而出名的,剪叉构造相近剪子样子,采用矩形锰钢管或高强度钢板,钢材强度高,驱动系统采用电液驱动,驱动货梯通过液压缸上升,由于液压剪叉驱动的液压升降机载荷较大,升降机安全稳定,主要用于仓库,车间,宾馆,食堂等楼层的货物上下运输,适用范围广。

Scissor type hydraulic lifting platform this is a vertical mobile elevator. It is a special lifting platform used for freight transportation. It is commonly used outdoors. Scissor type hydraulic lifting platform is famous for the application of scissor type elevator structure. The scissor structure is similar to the scissor shape. It adopts rectangular manganese steel pipe or high-strength steel plate. The steel strength is high. The driving system adopts rectangular manganese steel pipe or high-strength steel plate. Electric hydraulic drive drives the goods elevator to rise through the hydraulic cylinder. Because the hydraulic lift driven by the hydraulic scissor has a large load and is safe and stable, it is mainly used for the up and down transportation of goods on the storehouse, workshop, hotel, canteen and other floors, with a wide range of applications.

2.滑轨链条式液压升降平台,这是这种无剪叉式液压升降平台,是这种运用十分普遍的货品综合脚手架机器设备,它根据电机驱动器汽油泵,借助液压缸驱动器重链来驱动器液压升降平台,因为选用液压机做为升举驱动力,具有载荷大,举升平稳等特点,链式液压升降机升降机采用双排链传动,大大提高了安全系数,小负载链式液压升降机采用钢丝绳调平保险,大负载链式液压升降机采用链条调平和保险,因此链式液压升降机的安全系数较高,广泛应用于高层建筑间的垂直货物运输。

2. Slide rail chain type hydraulic lifting platform, this is a non scissor type hydraulic lifting platform, which is a very common goods comprehensive scaffolding machine and equipment. It drives the hydraulic lifting platform according to the motor driving gasoline pump, with the help of the hydraulic cylinder driving the heavy chain. Because the hydraulic machine is selected as the lifting driving force, it has the characteristics of large load, stable lifting and so on. The chain type hydraulic lifting platform The elevator adopts double row chain drive, which greatly improves the safety factor. The small load chain hydraulic elevator adopts steel wire rope leveling insurance, and the large load chain hydraulic elevator adopts chain leveling and insurance. Therefore, the safety factor of the chain hydraulic elevator is high, which is widely used in the vertical cargo transportation between high-rise buildings.

随之高宽比的持续提升,液压升降平台的负载再次提升,升降平台底端的汽车底盘也规定愈来愈平稳,液压升降平台普遍适用小车,海运集装箱,模具加工,原木加工,化工厂罐装等各种制造业企业及自动生产线,满足不同作业高度的升降需求,同时可配装各类台面形式(如滚珠,滚筒,转盘,转向,倾翻,伸缩),相互配合各种各样操纵方法(分动,连动,防爆型),具备升降机稳定精确,经常起动,载货量大等特性,合理处理制造业企业中各种升降机工作难题,使生产制造工作轻轻松松,铝合液压升降平台金登高作业台全新升级设计方案的全新商品,采用了新型铝合金型材,由于型材强度高,使升降台的偏转与摆动极小,为了保证移动升降机的稳定性,机械设计人员在升降机设计中安装了各种类型的液压腿,论述了各种各样腿的基本原理,应用和维护保养,那条腿的主题活动腿门铰链在固定不动腿上,进行姿势由液压油缸进行,具备构造简易,很轻的特性,是这种新式的构造方式,它的关键特性是:

With the continuous improvement of the height width ratio, the load of the hydraulic lifting platform is increased again, and the automobile chassis at the bottom of the lifting platform is also regulated to be more and more stable. The hydraulic lifting platform is generally applicable to all kinds of manufacturing enterprises and automatic production lines, such as small cars, shipping containers, mold processing, log processing, chemical plant tank loading, etc., to meet the lifting requirements of different working heights, and can be equipped with all kinds of platforms at the same time. Surface form (such as ball, roller, turntable, steering, tipping, expansion), mutual cooperation with a variety of control methods (transfer, linkage, explosion-proof type), with elevator stable and accurate, frequent start, large load and other characteristics, reasonable handling of various lifting machine problems in manufacturing enterprises, so that the production and manufacturing work is light and loose, aluminum hydraulic lifting platform golden high operation A brand new product with a brand-new upgraded design scheme adopts a new type of aluminum alloy profile. Due to the high strength of the profile, the deflection and swing of the lifting platform are very small. In order to ensure the stability of the mobile elevator, the mechanical designer has installed various types of hydraulic legs in the elevator design, and discussed the basic principle, application, maintenance and theme activities of the legs. The leg door hinge is fixed on the fixed leg, and the posture is carried out by the hydraulic oil cylinder. It has the characteristics of simple structure and light weight. It is a new construction method, and its key characteristics are:

(1)青蛙腿:。

(1) frog leg.

这种腿的活动腿是以固定腿为铰链的,展开动作是由液压缸完成的,具有结构简单,重量轻的特点,但腿跨不大,仅适用于小吨位起重机。

The movable leg of this kind of leg is hinged by the fixed leg, and the unfolding action is completed by the hydraulic cylinder, which has the characteristics of simple structure and light weight, but the leg span is not large, so it is only suitable for small tonnage crane.

(2)H支腿:。

(2) H leg:.

此支脚不常见于液压升降平台,有2个液压油缸,升降平台基本原理:齿轮油由叶片泵产生必须的工作压力,经油过滤器,防爆型电磁感应卸车机液压换向阀,溢流阀,液控单向阀,静态平衡阀进到液缸下方,使液缸的活塞杆往上健身运动,提升重物,液缸上端回油经隔爆型电磁换向阀回到油箱,其额定压力通过溢流阀进行调整,通过压力表观察压力表读数值,当移动腿向外伸展后,垂直腿在工作时支持地面,形状类似于H并获得名称,它具有腿跨大,对场地适应性强等特点,目前得到了广泛的应用。

This foot is not common in the hydraulic lifting platform. It has two hydraulic cylinders. The basic principle of the lifting platform is that the gear oil is generated by the vane pump to the necessary working pressure. Through the oil filter, the explosion-proof electromagnetic induction unloader hydraulic reversing valve, overflow valve, hydraulic control check valve and static balance valve, it enters the lower part of the hydraulic cylinder to make the piston rod of the hydraulic cylinder exercise upward, lift the weight and return the oil at the upper end of the hydraulic cylinder. After returning to the oil tank through the explosion-proof electromagnetic directional valve, its rated pressure is adjusted by the overflow valve. The pressure gauge is used to observe the reading value of the pressure gauge. When the moving leg extends outwards, the vertical leg supports the ground when it works, the shape is similar to h and the name is obtained. It has the characteristics of large leg span and strong adaptability to the site, and has been widely used at present.

(3)X腿:{+*/}当该腿工作时,腿呈X形,重物的空间比H腿大,常与H腿结合使用,形成前H和后X两种类型。

(3) x-leg: {+ * /} when the leg is working, the leg is X-shaped, and the space of weight is larger than h-leg. It is often used in combination with h-leg, forming two types of front h and back X.

(4)辐射腿:。

(4) radiation leg:.

四条腿从框架的盆框向外辐射,以转盘的旋转中心为中心,它具有稳定性好的特点,主要用于大型起重机的起重作业。

The four legs radiate from the basin frame of the frame and take the rotating center of the turntable as the center. It has the characteristics of good stability and is mainly used for the lifting operation of large cranes.

(5)摆动腿:。

(5) swinging leg:.

这种腿在举升操作中,登车桥在液压缸的作用下,腿可以摆动到与机架纵轴垂直的位置,在非工作状态下,腿不能太长,所以横向支撑的间隔很小,腿的维护方法为:。

In the lifting operation of this kind of leg, the landing bridge can swing to the position perpendicular to the longitudinal axis of the frame under the action of the hydraulic cylinder. In the non working state, the leg cannot be too long, so the interval of the lateral support is very small, and the maintenance method of the leg is:.

在修理液压升降机的支撑系统时,首先拆下活动腿,测量导槽的大小,并确定修复焊接的厚度,修复焊接时,用螺钉和螺母安装矩形铜垫,将铜管套在螺钉上,完成一段修复焊接,然后移动下一段修复焊接,直到焊接完成为止,为了方便起见,电极也可以适度弯曲,但是,必须注意的是,焊接修复的位置必须位于图1中的导向槽的下表面,这不会影响液压缸活塞杆的行程和固定支腿与移动支腿之间的相对角度,焊接后,以一个标准轴(轴直径等于滚动套筒的外径)作为修改形状的参考,应该注意的是,沟槽的两侧必须同时用相同的轴进行修复。

When repairing the support system of the hydraulic elevator, first remove the movable leg, measure the size of the guide groove, and determine the thickness of repair welding. When repairing welding, install a rectangular copper pad with screws and nuts, cover the copper pipe on the screws, complete a repair welding section, and then move the next repair welding section until the welding is completed. For convenience, the electrode can also be bent moderately. However, it must be noted that the welding repair position must be located on the lower surface of the guide groove in Figure 1, which will not affect the stroke of the piston rod of the hydraulic cylinder and the relative angle between the fixed leg and the moving leg. After welding, a standard shaft (the shaft diameter is equal to the outer diameter of the rolling sleeve) should be used as the reference for modifying the shape. It should be noted that both sides of the groove must use the same phase. Repair the same shaft.

XML 地图 | Sitemap 地图