Lifting platforms are now very popular with people and can easily deliver goods to skyscrapers. Among them, the oil-pressure lifting platform is more popular, and you can choose the right one according to your own specific conditions.
First, the adjustment of power unit is controlled by power unit and hydraulic cylinder, whether it is a hydraulic lifting platform with scissors or a sliding rail. The power unit has four outlets in the production and manufacture, which can adjust the size, expand or reduce the total flow of gear oil in the hydraulic cylinder. We can adjust the flow of hydraulic oil by adjusting the speed of motor or electro-hydraulic proportional valve. The longer the hydraulic tubing is, the longer the rising time will be. Therefore, in the installation, the length of oil pipeline should be reduced as much as possible within the allowable range of design; on the basis of adjusting power unit, the size of oil pipeline can also be adjusted, and on the premise of ensuring the safety of equipment to meet normal demand, corresponding adjustments can be made.
3. Hydraulic cylinder manipulation, hydraulic cylinder specifications, in consideration of the design requirements, as far as possible to reduce the hydraulic cylinder specifications. The smaller the size of hydraulic cylinder, the faster the rising rate.
4. The load of goods and the tonnage of goods transported once also endanger the speed of the elevator. Exceeding the excellent value of the goods transported by the hydraulic elevating platform is the guarantee of the speed. If the emphasis is on the arrival rate of the hazards, if the goods are too light, it will also endanger all the normal transportation time.
1. The hydraulic cylinder of the hydraulic lifting platform is seriously damaged. If the inner closed ring is damaged unevenly or there are obstacles inside, it is very easy to cause the support unevenness and the lift height width ratio of the hydraulic cylinder is unevenly. It is suggested to carefully check whether the hydraulic cylinder is normal.
2. There are foreign bodies in the oil pipeline of the lifting platform, which cause uneven force and uneven table surface when transporting hydraulic oil. It is suggested that the oil pipeline be carefully checked.
3. The dimension of the support rod of the lifting platform is inconsistent, which belongs to the quality defect of the lifting platform equipment itself. It is suggested to contact the manufacturer for replacement. The probability of this situation is low.
4. The different transmission shafts in the middle of the support rod of the hydraulic lifting platform make it impossible for the hydraulic lifting platform to work normally. The service platform is severely damaged and the cabinet countertop is skewed. Please check carefully that the original factory of the normal shearing high-altitude working vehicle has not done rigorous skewing inspection before, so the capital has been put into the sales market, which has caused many accidents, and for the skewing. Detection, for the majority of small enterprises, is not very concerned about this link of detection, which is why there is such a large number of lifting equipment exists this problem. The problems of cylinder and power unit system are often the lack of power and the unqualified quality of cylinder. Lifting platform is also a very important issue for enterprises themselves./